Digital ID View Real-time NETWORK VIDEO RECORDER Manuel d'utilisateur télécharger pdf (Page 41)

User’s Manual

4.6.1 Dome Connection

Follow the steps to install dome camera.

• See OSD Menu Setup Guide, Section Rear Panel Connections for RS-485

port pin definition.

• Refer to the following figure. Connect the R+, R- terminals on the dome

camera to the D+, D- terminals on the RS-485 port by RS-485 cable

respectively.

4.6.2 Dome Protocol Setup

The Dome Protocol item lists the available dome protocols for communicating

with dome cameras connected to the Full-featured MPEG 4 DVR. From the

Main menu, select <Camera Setup> and press ENTER. The following menu is

displayed.

Camera Setup

1. Camera Select

2. Dome Protocol

3. Dome ID

4. Camera Title

5. Covert

6. Termination

7. Brightness

8. Contrast

9. Saturation

10. Hue

11. Audio Association

CH1

None

Both

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Digital ID View Real-time NETWORK VIDEO RECORDER Manuel d'utilisateur Page 41