Digital ID View 960H Series Manuel d'utilisateur télécharger pdf (Page 29)

3 PTZ Control

Click on the “PTZ” icon to enable the PTZ control panel as shown below.

The PTZ control will apply the PTZ command to the current focus camera channel if

it’s connected to a PTZ device.

The functions are:

 8 way pan/tilt control: To pan/tilt the PTZ device to up/down/left/right/up

right /up left /down right / down left.

 Zoom + / - : Zoom in or Zoom out

 Focus + / - : To adjust focus to near or far

 Iris + / - : To adjust Iris to open or close

 Speed : There are five levels of speed (Lowest/Low/Normal/High/Highest)

can be applied when press the pan/tilt control.

 Set: To save the current PTZ position as it’s internal preset position.

 Go : Go to the preset position

 Quick Preset 1–10 : The quick button to go to the preset positions.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 114 115

Pas de commentaire

Digital ID View 960H Series Manuel d'utilisateur Page 29