Digital ID View Real-time NETWORK VIDEO RECORDER Guide de l'utilisateur télécharger pdf (Page 124)

18: Network Video

124 —

revision 38

2. The program will automatically detect IP cameras connected to the network.

The MAC address, IP address, model, and serial number will be displayed.

3. You may need to cycle power to your IP camera. To do so, unplug the

camera from the network, and then plug it back in again.

4. To change the IP address, select the MAC address of the camera you wish to

change.

5. Click the radio button, Use the following IP address.

6. Enter the new IP address.

7. Enter the subnet mask.

8. Enter the default gateway.

9. Enter information for the DNS server address. If you do not know what to

enter, please check with your network administrator.

10. Once you are finished, click [OK] to save your changes and exit.

If there are other cameras to configure, you may click [Reboot] and select

another camera.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 133 134

Pas de commentaire

Digital ID View Real-time NETWORK VIDEO RECORDER Guide de l'utilisateur Page 124